USDOL Cites Basic Grain Products In Coldwater, OH For Safety Violations

Two willful violations with penalties of $70,000 have been cited for the employer's failure to develop and ensure machine-specific energy control procedures were used to control the flow of hazardous energy when workers were cleaning the conveyor system, which left them exposed to amputation and "caught-by" hazards. A willful violation is one committed with intentional, knowing or voluntary disregard for the law's requirement, or plain indifference to employee safety and health.

Seven serious safety violations with penalties of $38,000 involve the employer's failure to provide guarding around floor holes, provide adequate assessments to determine if personal protective equipment was required, provide training on lockout/tagout procedures for hazardous energy sources, guard machines and shaft ends, certify that a workplace hazard assessment was performed, provide workers with safety glasses while they were cleaning with compressed air, and use compressed air for cleaning at a pressure of less than 30 pounds per square inch. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

Four other-than-serious violations with $4,000 in penalties involve failing to properly complete the OSHA 300 injury and illness log for the years 2008 through 2011. An other-than-serious violation is one that has a direct relationship to job safety and health, but probably would not cause death or serious physical injury.

"Failing to develop and implement procedures to control hazardous energy by locking out equipment prior to cleaning operations exposes workers to amputation and caught-by hazards, and demonstrates this employer's lack of regard for workers' safety and health," said Kim Nelson, OSHA's area director in Toledo. "OSHA is committed to protecting workers on the job, especially when employers fail to do so."

Prior to this inspection, the company had been inspected by OSHA five times since 2001, resulting in citations for 12 serious violations related to electrical safety, machine guarding and a lack of hazard communication.

Basic Grain Products has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA's area director or contest the findings before the independent Occupational Safety and Health Review Commission.

Share This Article: