Off topic humor - Labor Pain Transfer

[WCisBS]

A married couple went to the hospital to have their baby delivered.

Upon their arrival, the doctor said that the hospital was testing an amazing new high-tech machine that would transfer a portion of the mother's labor pain to the baby's father. He asked if they were willing to try it out.

Both said they were very much in favor of it.

The doctor set the pain transfer to 10 percent for starters, explaining that even 10 percent was probably more pain than the father had ever experienced before. But as the labor progressed, the husband felt fine and asked the doctor to go ahead and kick it up a notch.

The doctor then adjusted the machine to 20 percent pain transfer. The husband was still feeling fine. The doctor then checked the husband's blood pressure and was amazed at how well he was doing.

At this point they decided to try for 50 percent. The husband continued to feel quite well. Since the pain transfer was obviously helping the wife considerably, the husband encouraged the doctor to transfer ALL the pain to him. The wife delivered a healthy baby with virtually no pain, and the husband had experienced none. She and her husband were ecstatic.

When they got home they found the UPS man dead on the porch.

[Guest]

I had a blonde moment, didnt get it at first. Then I did and lmao.... where do you find these?

[jayne]

LOLOLOLOL

[admin]

That one just may have to be the CompBob! Joke of the week this Friday.

[Guest]

I still cant help but laught at that avatar roflmao.... Everytime I see it, I bust out laughing, Geena thinks Im nuts.

[red1030]

Ok...that did it..I actually started laughing for the first time today...thank you

[monster]

LMAO...thank you!

[jayne]

it was cute wasnt it

[WCisBS]

HOW TO IMPRESS A WOMAN

Wine her,
Dine her,
Call her,
Hug her,
Support her,
Hold her,
Surprise her,
Compliment her,
Smile at her,
Listen to her,
Laugh with her,
Cry with her,
Romance her,
Believe in her,
Cuddle with her,
Shop with her,
Give her jewelry,
Buy her flowers,
Hold her hand,
Write love letters to her,
Go to the end of the earth and back again for her.


HOW TO IMPRESS A MAN

Show up naked.
Bring food.

***********************************************

Common Tools and their purpose:
DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, splattering it against that freshly-stained heirloom piece you were drying.

WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprints and hard-earned guitar calluses from fingers in about the time it takes you to say, "Yeou ...."

ELECTRIC HAND DRILL: Normally used for spinning pop rivets in their holes until you die of old age.

SKIL SAW: A portable cutting tool used to make studs too short.

PLIERS: Used to round off bolt heads. Sometimes used in the creation of blood-blisters. The most often tool used by all women.

BELT SANDER: An electric sanding tool commonly used to convert minor touch-up jobs into major refinishing jobs.

HACKSAW: One of a family of cutting tools built on the Ouija board principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.

VISE-GRIPS: Generally used after pliers to completely round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.

WELDING GLOVES: Heavy duty leather gloves used to prolong the conduction of intense welding heat to the palm of your hand.

OXYACETYLENE TORCH: Used almost entirely for lighting various flammable objects in your shop on fire. Also handy for igniting the grease inside the wheel hub you want the bearing race out of.

WHITWORTH SOCKETS: Once used for working on older British cars and motorcycles, they are now used mainly for impersonating that 9/16 or ½ socket you've been searching for the last 45 minutes.

TABLE SAW: A large stationary power tool commonly used to launch wood projectiles for testing wall integrity.

HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground after you have installed your new brake shoes, trapping the jack handle firmly under the bumper.

EIGHT-FOOT LONG YELLOW PINE 2X4: Used for levering an automobile upward off of a trapped hydraulic jack handle.

TWEEZERS: A tool for removing wood splinters and wire wheel wires.

E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.

RADIAL ARM SAW: A large stationary power saw primarily used by most shops to scare neophytes into choosing another line of work.

TWO-TON ENGINE HOIST: A tool for testing the maximum tensile strength of everything you forgot to disconnect.

CRAFTSMAN 1/2 x 24-INCH SCREWDRIVER: A very large pry bar that inexplicably has an accurately machined screwdriver tip on the end opposite the handle.

AVIATION METAL SNIPS: See hacksaw.

TROUBLE LIGHT: The home mechanic's own tanning booth. Sometimes called a drop light, it is a good source of vitamin D, "the sunshine vitamin," which is not otherwise found under cars at night. Health benefits aside, its main purpose is to consume 40-watt light bulbs at about the same rate that 105mm howitzer shells might be used during, say, the first few hours of the Battle of the Bulge. More often dark than light, its name is somewhat misleading.

PHILLIPS SCREWDRIVER: Normally used to stab the vacuum seals under lids and for opening old-style paper-and-tin oil cans and splashing oil on your shirt; but can also be used, as the name implies, to strip out Phillips screw heads. Women excel at using this tool.

STRAIGHT SCREWDRIVER: A tool for opening paint cans. Sometimes used to convert common slotted screws into non-removable screws.

AIR COMPRESSOR: A machine that takes energy produced in a coal-burning power plant 200 miles away and transforms it into compressed air that travels by hose to a Chicago Pneumatic impact wrench that grips rusty bolts which were last over tightened 30 years ago by someone at Ford, and instantly rounds off their heads. Also used to quickly snap off lug nuts.

PRY BAR: A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.

HOSE CUTTER: A tool used to make hoses too short.

HAMMER: Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate the most expensive parts adjacent the object we are trying to hit. Women primarily use it to make gaping holes in walls when hanging pictures.

MECHANIC'S KNIFE: Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector magazines, refund checks, and rubber or plastic parts. Especially useful for slicing work clothes, but only while in use

[red1030]

Ok..you win...now I had a second laugh...